|
A picture showing the planed lead in the centerboard |
| The centerboard all faired and ready for fiber glassing as soon as I finish the other side |  |
 |
I made a quick and dirty scarfing jig that I attached to my
work table . .. I got the idea from a web site I found and adapted for my
needs.. it took me about 20 minutes to make
I do not know this person and have never talked to him |
| I was happy with the results |  |
 |
I scarfed to gether two sheets of 12 mm for the bottom panel and will draft that out tomorrow and start setting up the profiles on the building jig............. |
| I stapled 2 halves of a door skin together and made a pattern of the bottom panel and traced it on to the 12 mm |  |
 |
This shows the bottom panel screwed onto the profiles |
| I dry fit a few pieces to finally see how every thing goes together .... the center board fit in nicely and I don't have to do much fitting at all along bottom... I did notice on mistake though ..... I put the bunk listing completely to high I must have been sniffing to much glue or something when I put those on the center case.... nothing that can't be fixed with a rabbit plane and... no body will ever know ........ I am sure I will find lots of f (!@#(!#!( ups but after all it's a boat not a piano...... anyway it was fun to see something coming together finally................ |  |